Learn How to Solder Circuit Boards and Pipes
Learning how to solder is a skill that must be taught correctly and needs to be practiced. Soldering can be a creative process or an invaluable tool that takes a long time to master. The word solder comes from the Middle English word souder, meaning to make solid. Soldering is defined as the joining of metals by fusion of alloys that have relatively low melting points. It is especially useful in electrical and plumbing works.
Steps guiding you how to solder
Soldering is not something that comes naturally or can be learned within a day or two. It is a creative process that takes lot of time to learn. If you are not skilled enough, you can face huge problems at the time of soldering. There are plenty of aspects on how to solder, which you need to adapt before you step in. Therefore, as a beginner if you want to have a first hand experience of soldering, you need to follow some basic steps that will help you learn how to solder.
Before you start soldering, make sure that your equipments are perfect enough. The choice of solder is very important. Wrong selection of soldering machine can cause much trouble, damaging the circuits and components.
You need to select clean surface if you want a strong resistant joint. All surfaces that you want to solder should be cleaned with steel wool or some solvent. After cleaning, get ready to place the component on board through paper holes. Once you are sure that the component is properly placed, you can proceed to the next step of applying heat.
Applying small amount of solder to the tip of the iron, you can make up the joint, but remember that it is not solder only that will help you to join. Here heat is also crucial in the process of joining. Allow the solder to cool and don’t move the joint for a few seconds as further movements can lead to cold solder joint.
Finally, after finishing all the solder joints, you can clean it with steel wool or solvent to remove the entire unwanted residue. This in turn will prevent oxidation and keep it nice and shiny. However, prior to learning how to solder, you should also be cautious enough regarding its smell as that can at times cause suffocation.
Therefore, if this is your first time to gain first hand experience in soldering and to save both time and money, you don’t need to call the professionals, just follow the steps on how to solder and get down to some serious business.
|
|
